Make sure you have three things ready, then follow four steps in order: wire it up → install and connect → choose a profile → set up your game. Each step ends with a result you can check yourself.

Before you start: what you need

Which device will run HWMacro?

01 Wire it up

Connect in this order: mouse → Android phonesecond PC → gaming PC.

MAKCU Hardware BoxUSB1USB2USB3Gaming PCAndroid / Tablet, or second PCMouse123
MAKCU Hardware BoxUSB1USB2USB3Gaming PCAndroid / Tablet, or second PCMouse123
  1. Mouse → USB3

    2.4 GHz wireless mouse: plug the receiver into MAKCU USB3. Wired mouse: plug the mouse cable into MAKCU USB3. Bluetooth mice are not supported.

    MAKCU
    USB1 / USB2 / USB3, left to right
    MAKCU
    USB1 / USB2 / USB3, left to right
  2. USB2 → Android phone

    Plug the USB-C OTG adapter into the phone.

  3. USB2 → second PC

    Use a USB cable with identical ends: one end into box USB2, the other into the second PC.

  4. Gaming PC → USB1

    Plug a USB cable with identical ends: one end into the gaming PC, the other into box USB1.

02 Install and connect

  1. Download and install

    Download for Android ↓The system warns you once; that is normal. Allow “unknown sources” once. Tap the installer in the notification shade when it finishes.
    Download for Windows ↓The system warns you once; that is normal. Choose “More info” → “Run anyway”.

  2. Install the CH343 driver

    Windows needs this driver before it can see the box. After installing HWMacro, run the installer: download CH343SER.EXE. Double-click it, then open the app.

  3. Set the polling rate to 1000 Hz, open HWMacro

    Your mouse polling rate must be 1000 Hz; a higher rate causes stutter or dropouts. Open the app and sign in.

  4. Tap "Connect"

    Back on the app Home screen, tap “Connect” in the Device Connection card to start connecting MAKCU.

    One permission prompt

    The first connect asks once: tick the box and tap Allow.

  5. Tap "Test buttons"

    App → Home → Test buttons. No game needed: press every mouse button and the matching spot on the diagram lights up.

    [缺少截图元数据: start-03-connection]

Done when: the Device Connection card in the app shows “Connected”.

03 Choose a profile and trigger the recoil once

Profile group = the game you are playing. Profile library = every profile for that game. Profile = one entry, the recoil data for one weapon.

  1. Select the profile group

    Tap Groups at the bottom and pick the game you are playing, for example CS2.

    [缺少截图元数据: start-04-groups]
  2. Activate a profile

    Open the library. There are two ways to switch:

    • Tap a profile card directly.
    • Set a keyboard shortcut (top-right corner of the card).

    The name of the active profile also shows at the top.

    [缺少截图元数据: start-04-profiles]
  3. Try the recoil trigger once

    No game needed: test it on the desktop now. The default mode is Hold. Go to App → Home → Recoil Guide and follow it once.

    [缺少截图元数据: start-04-trigger]

Done when: you complete one full trigger in Recoil Guide.

04 Set up your game and confirm the result

FAQ

What does my phone need?

Android phone or tablet: Android 8.0 or newer.

Network: signing in and loading profiles need a connection. Right after installing, confirm that you can sign in.

What does my PC need?

Second Windows PC: Windows 10 or 11, 64-bit (the installer is 64-bit only).

Network: signing in and loading profiles need a connection. Right after installing, confirm that you can sign in.

What do "profile group", "profile library" and "profile" mean?

Profile group = the game you are playing.

Profile library = every profile for that game.

Profile = one entry in it, the recoil data for one weapon.

What is the difference between Hold and Tap?

Hold is the default and you do not have to change it.

Hold (recommended): keep holding. Recoil starts when both keys are held and stops as soon as you release either one. Nothing to toggle, so melee, utility and other actions keep working.

Tap: no need to hold. Tap once to start, tap again to stop after the clip.

To switch: see "Recoil Guide" in the app.

What is the CH343 driver, and why do I need it?

It is the small program that lets Windows recognise the box. Without it the PC does not see the box.

02 has a separate step for it with the download link (CH343SER.EXE); download it and double-click to install.

Do I need to buy a data cable separately?

Usually not. The box normally ships with 2 USB-A male-to-male data cables: enough for the gaming PC plus your phone (or a second PC).

Buy one only if a cable is missing. Look for "supports data transfer"; a charge-only cable does nothing at all.

It drops after a while?

Drops are usually Android killing the app in the background: disable battery optimization for HWMacro and allow it to auto-start.

The recoil stutters?

Set the mouse polling rate to 1000 Hz first.

Stuck on one of the steps?

Every step ends with a "stuck?" fold. Open it there first; it covers the most likely causes for that step.

Still cannot find it by symptom?